A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z

Viewing results 0 - 10 of 12 matches for "K" Back   |   Next
kata thermometer
alcohol thermometer used to measure low velocities in air circulation by heating the large bulb of the thermometer above 100°F (38°C) and noting the time it takes to cool from 100°F to 95°F (38°C to 35°C) or some other interval above ambient temperature with the time interval being a measure of the air current at that location.
katharometer (katherometer)
instrument for measuring the CO2 concentration in a cold storage atmosphere working on the principle that CO2 has a thermal conductivity different from other gases. Concentrations of other gases can also be measured using this principle.
Kelvin temperature
SI absolute temperature scale on which the triple point of water is 273.16 K and the boiling point is approximately 373.15 K (1 K = 1°C). The Kelvin is the fraction 1/273.16 of the temperature of the thermodynamic triple point of water. See triple point.
Kepler’s laws
three laws describing the motions of planets in their orbits: (1) the orbits of planets are ellipses with the sun at the common focus; (2) the line joining a planet and the sun sweeps over equal areas during equal intervals of time; (3) the squares of the periods of revolution of any two planets are proportional to the cubes of their mean distances from the sun.
k-factor (thermal conductivity)
time rate of steady-state heat flow through a unit area of a homogeneous material, induced by a unit temperature gradient in a direction perpendicular to that unit area. Units are Btu in./h·ft2·°F or Btu/h·ft·°F [W/(m·K)].
kilovolt ampere (kVA)
the product of the line current (amperes) times the nominal system voltage (kilovolts) times 1.732 for three-phase currents. For single-phase applications, kVa is the product of the line current (amperes) times the nominal system voltage (kilovolts).
kinematic viscosity
ratio of absolute viscosity to density of a fluid. A measure of a fluid’s resistance to flow in units of centistokes.
kinetic energy
energy caused by the velocity of molecules.
king valve (master valve)
(1) stop valve between receiver and liquid main in a refrigeration system. (2) stop valve on boiler head.
Kirchoff’s law
ratio of the emissivity of a heat radiator to the absorptivity of the same radiator is the same for all bodies, depending on frequency and temperature alone, and is equal to the emissivity of a blackbody.
Back   |   Next
Questions. Comments. Feedback.

About ASHRAE Terminology

ASHRAE Terminology, a free resource, is a comprehensive online glossary of more than 3700 terms and definitions related to the built environment, with a focus on heating, ventilating, and air conditioning (HVAC), as well as refrigeration, building envelope, electrical, lighting, water and energy use, and measurement terms.

This searchable glossary was designed for use by engineering professionals but is also useful for architects, building owners and operators, educators, public officials, and homeowners.

The terms in ASHRAE Terminology have been assembled and defined and are updated on an ongoing basis by ASHRAE Technical Committee (TC) 1.6, Terminology. TC 1.6 is concerned with terminology, nomenclature, definitions, abbreviations, symbols, and the International System (SI) and Inch-Pound (I-P) units used in the fields of heating, ventilating, air conditioning, water heating, and refrigeration.

To request a free electronic file of the complete list of terms and definitions, email ashraetermseditor@ashrae.org.